Concrete Repair & Resurfacing in Lexington keeps your driveways, patios, and walkways safe and looking sharp. The Bluegrass terrain and our freeze-thaw winters create a perfect storm for concrete damage: scaling from road salt, spalling from moisture cycling, and settlement from our clay subsoil shifting beneath slabs. Older neighborhoods like Ashland Park and Chevy Chase see porch steps and driveway panels sink and tilt over years, while newer subdivisions toward Masterson Station face the same creep as our karst bedrock and seasonal swelling take their toll. Rather than replace an entire slab, we repair cracks, resurface worn and damaged areas, and level settled sections to restore safety and curb appeal. We match color and finish to the original, so the repair blends seamlessly with the rest of your concrete. Let us handle the damage before it spreads or creates a trip hazard.
Why Concrete Repair & Resurfacing Matters in Lexington's Climate
Lexington's winters deliver dozens of freeze-thaw cycles each year, and road salt from our streets bleeds onto driveways and sidewalks, triggering surface scaling that exposes the aggregate beneath. Spring and summer rains test grading and drainage, and our deep red-brown silt loam over clayey subsoil means water sits and settles unevenly. Older concrete loses its seal, cracks widen, and spalling (flaking and pitting) accelerates. A cracked driveway or sunken walkway becomes a liability, a trip hazard, and an eyesore. Catching damage early and resurfacing the affected areas stops the failure from spreading into the base layer.
- We identify scaling, spalling, and surface cracks before they penetrate deep into the slab.
- We remove loose material and repair the damaged section with matched concrete and finish.
- We level settled or tilted panels to eliminate trip hazards and restore proper drainage.
- We apply a protective seal to guard against future salt and moisture damage.
- We restore the look and safety of your concrete without the cost and disruption of full replacement.
Early repair saves money and extends the life of your concrete by years.
Lexington reality: Our karst bedrock and clay subsoil mean sinkholes and soft spots can undermine slabs. Driveway panels in Lansdowne and Gardenside often settle unevenly, creating lips and tilts. We repair and level these sections to restore safety and prevent further damage.
For more on how we handle settled or uneven concrete, see our page on Concrete Leveling & Slab Lifting.
How We Repair and Resurface Concrete in Lexington
Our repair process starts with a thorough inspection of the damage, the underlying base, and drainage patterns. We remove loose concrete, clean the area, and assess whether the damage is surface (scaling or spalling) or structural (deep cracks or settlement). For surface damage, we grind and resurface with a new layer matched to the original color and finish. For structural issues like settlement, we may level the slab or repair deeper cracks before resurfacing. Every job is customized to the scope and the home's concrete style.
- We inspect the full extent of damage and map out the repair zone to prevent spreading.
- We remove all loose, flaked, or spalling concrete down to sound material.
- We clean and prepare the surface for bonding with the repair material.
- We apply matched concrete resurfacer or overlay, troweled smooth and finished to blend with the original.
- We cure the new material properly and recommend sealing to protect against future damage.
The result is a safe, seamless repair that looks and performs like the original concrete.
Lexington example: A brick ranch in Southland had a driveway with salt scaling and a sunken panel near the garage. We ground out the scaled surface, repaired the sunken section with leveling compound, and resurfaced the entire drive with a gray concrete overlay matched to the original. The homeowner avoided a full replacement and kept the same curb appeal.
If you need more than repair, such as full replacement or removal, visit our Concrete Removal & Replacement page.
Concrete Repair & Resurfacing Methods
| Approach | Description | Best for |
|---|---|---|
| Grinding & Resurfacing | We grind the damaged surface and apply a new concrete overlay, troweled smooth and sealed. | Scaling, spalling, and surface wear on driveways, patios, and walkways. |
| Crack Repair | We clean, prime, and inject epoxy or polyurethane sealant into cracks to prevent water and salt intrusion. | Hairline to moderate cracks that have not settled or shifted. |
| Slab Leveling & Repair | We use self-leveling compounds or targeted lifting to raise settled or tilted panels back to grade. | Sunken driveways, walkways, and porch steps that create trip hazards. |
| Concrete Patching | We cut out damaged sections and fill with new concrete patched to match the original color and texture. | Isolated pits, spalls, or edge damage that does not affect the whole slab. |
| Sealing & Protection | We apply a protective sealant to repaired concrete to block salt, moisture, and UV damage. | All repair jobs, to extend life and prevent new damage in Lexington's freeze-thaw climate. |
Concrete Repair & Resurfacing Cost in Lexington: What to Expect
Concrete repair and resurfacing costs typically start at $3 per square foot for basic surface repairs like scaling or spalling, and can rise depending on the scope of damage, the depth of repair needed, and accessibility. A small driveway section (100 to 200 square feet) might run $300 to $600, while a full driveway resurfacing (400 to 600 square feet) often ranges from $1,200 to $1,800. Factors that push cost higher include deep cracking, settlement that requires leveling, poor drainage that demands grading changes, and proximity to landscaping or structures that limit access. Getting 2 to 3 estimates helps you compare scope, method, and price, and ensures you understand what each contractor is repairing and how they plan to finish it.
For a detailed breakdown of our pricing across all services, visit our full pricing overview. We offer free estimates within 24 hours, no obligation to book.
Concrete Repair & Resurfacing Near Me: What Lexington Homeowners Should Know When Hiring
Hiring a contractor for concrete repair is a straightforward decision when you know what to look for. Start by confirming that the contractor carries general liability and workers compensation insurance, and ask for a certificate of insurance on request. Never hire based on price alone; instead, get multiple estimates and ask each contractor to walk you through the repair method, the materials they'll use, and how long the job will take. Check references from past work in your neighborhood, whether Beaumont, Hartland, or Chevy Chase. If your property is in a historic district or under HOA rules, confirm that your contractor understands local setback, width, and design guidelines, and check whether a permit is required with the city. A professional contractor will discuss these details upfront and help you navigate any regulatory requirements.
- We carry full general liability and workers compensation coverage on every job.
- We provide free estimates within 24 hours and explain the repair scope and cost clearly.
- We check local permit requirements and help you understand any HOA or historic district guidelines.
- We offer references from Lexington homeowners and surrounding areas like Nicholasville, Versailles, and Winchester.
- We stand behind our work with a warranty and follow-up inspection to ensure the repair holds.
Ready to get started? Contact us for a free estimate at (859) 710-6168.
Concrete Repair & Resurfacing in Lexington: Pricing Guide
| Service | Price | Details |
|---|---|---|
| Surface Repair (Scaling & Spalling) | Starting at $3/sq ft | Grinding and resurfacing of salt-damaged or spalled concrete, finish matched to original slab |
| Crack Repair | Starting at $2 to $4 per linear foot | Cleaning and injection of epoxy or polyurethane sealant into cracks to prevent water intrusion |
| Slab Leveling & Settling Repair | Starting at $4 to $6/sq ft | Lifting and leveling of sunken or tilted panels using self-leveling compounds or targeted methods |
| Full Driveway Resurfacing | Starting at $3.50/sq ft | Complete surface grinding and overlay application for 400 to 600 sq ft residential driveways |
| Complex or Large-Scale Repair | On estimate | Deep structural damage, settlement, or poor drainage requires site inspection and custom scope assessment |
| Free Estimate & Travel | No charge | Response within 24 hours in Lexington and surrounding areas, no mileage fee or call-out charge |
Indicative pricing, the exact cost depends on square footage, finish, and site access. Free personalized estimate within 24h at (859) 710-6168.
